MB7IVA Simplex Gateway, Carmarthen, Wales IO71UU - 144.9625MHz - 94.8Hz CTCSS, NFM. Allstar Node 53045
Q. How do I use the link facilities? A. MB7IVA is connected to HUBNet. You can call through as if you were working through any Repeater or If you hear a QSO or a call, just respond or break in as you would normally. Your transmission will be going out worldwide to connected Gateways and Repeaters. It is important that your Radio is set to Narrow FM and that you leave four seconds between overs, so that all of the connected Repeaters can reset. Q. Why is narrow deviation important when using MB7IVA? A. This Video does a great job of explaining that Q. How do I check my own audio? A. Connect to the Parrot Server by sending the DTMF command *59 Q. Can I join an existing QSO? A. Of course, break in as you usually would, giving your Callsign. Bear in mind that there will be a slight delay because of the magic of the internet (stations should leave an additional pause between overs). Q. Why are some stations louder than others. A. This is down to the audio settings of their own set up or the Link/Repeater they are working through Q. There are remote stations connected and I want to connect elsewhere, can I disconnect them? A. Yes, wait for a pause and send the relevant DTMF command (shown on the index page). The DTMF shortcut to move to another location has the disconnect command built in.
Radio friendly Campsite in West Wales
144.9625MHz - 94.8Hz CTCSS - NFM
Website by GW6JSO
MB7IVA HUBNet Simplex Gateway, Carmarthen 144.9625MHz - 94.8Hz CTCSS - NFM
Q. How do I use the link facilities? A. MB7IVA is connected to HUBNet. You can call through as if you were working through any Repeater or If you hear a QSO or a call, just respond or break in as you would normally. Your transmission will be going out worldwide to connected Gateways and Repeaters. It is important that your Radio is set to Narrow FM and that you leave four seconds between overs, so that all of the connected Repeaters can reset. Q. Why is narrow deviation important when using MB7IVA? A. This Video does a great job of explaining that Q. How do I check my own audio? A. Connect to the Parrot Server by sending the DTMF command *59 Q. Can I join an existing QSO? A. Of course, break in as you usually would, giving your Callsign. Bear in mind that there will be a slight delay because of the magic of the internet (stations should leave an additional pause between overs). Q. Why are some stations louder than others. A. This is down to the audio settings of their own set up or the Link/Repeater they are working through Q. There are remote stations connected and I want to connect elsewhere, can I disconnect them? A. Yes, wait for a pause and send the relevant DTMF command (shown on the index page). The DTMF shortcut to move to another location has the disconnect command built in.
144.9625MHz - 94.8Hz CTCSS - NFM
Website by GW6JSO